ZETTLER Relays – Application Spotlight, April 2019.
Munich, Germany 24. April 2019 – In the area of solar inverters and the required relays for disconnecting the system from the public grid, the requirements for maximum current carrying capacity have continued - since the introduction of the well-known ZETTLER AZSR190T series (100 ampere) solar relay - gone up.
![AZSR1180 AZSR1180](https://zettlerelectronics.com/_Resources/Persistent/20b52fcc15cfca0a4f6d8f502af7d8bd3901205e/A5_AZSR1180_19025A_v2-199x157.jpg)
![AZSR11xx_Anschluesse AZSR11xx_Anschluesse](https://zettlerelectronics.com/_Resources/Persistent/703bd2284c58725ca1f6b6838b423838b9252884/A5_AZSR1200_18413A-174x157.jpg)
The switching capacity of the relays is 160 or 180 amps. The special design of the load terminals ensures that the heat is removed from the relay and thus a long lifetime can be achieved. Further technical data are a contact gap of at least 3.2 mm (3.6 mm on request) and clearance and creepage distances of at least 10 mm. The withstand voltage is 4,000 Vrms between coil and contact and 2,000 Vrms between the open contacts on the AZSR1160 and 2,600 Vrms on the AZSR1180. A design for currents up to 200 amperes is currently under development.
Both versions are UL and TÜV approved.
For similar solutions or to discuss the wide variety of application opportunities for the range of ZETTLER electronics relays, please contact:
ZETTLER electronics
Tel.: +49-89-800-97-0
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
About ZETTLER electronics
ZETTLER electronics, based in Puchheim (near Munich), is an internationally operating manufacturer and distributor of electromechanical components and assemblies. ZETTLER offers its customers a carefully coordinated product range of relays, magnetics, LCD modules, switches and fans for latest-generation industrial and consumer electronics. Read more at www.ZETTLERelectronics.com.